Slider mold

Slider mold products:
The slider is a mold assembly that can slide in a direction perpendicular to the opening and closing mold or at an angle to the opening and closing direction during the mold opening operation of the mold. When the product structure is such that the mold does not normally release the mold without using the slider, the slider must be used. The material itself has the appropriate hardness, wear resistance, and is sufficient to withstand the friction of motion. The cavity portion or core portion of the slider should have the same hardness as the rest of the cavity core.

The role of the slider mold:
Slider molds are widely used in spraying equipment, CNC machine tools, machining centers, electronics, automation machinery, textile machinery, automobiles, medical equipment, printing machinery, packaging machinery, woodworking machinery, mold opening and many other fields.

The method of installing the positioning device on the slider mold:
The slider should move a certain distance during the mold opening process, and the sliders can be safely returned after the front and rear molds are completely separated. The slider should be stopped at the correct position. If the slider slides forward or backward, it will cause the oblique edge and the hole pair to collide without collision. Therefore, it is necessary to install a positioning device for the slider, and there are basically two methods for installing the positioning device for the slider mold:
1. Wave pin screw positioning. It is easy to process and easy to operate; but the disadvantage is that it is easily damaged.
2. Position the spring and the limit screw. It is positioned safely. The main purpose is to overcome the gravity of the position by the elastic force generated by the preload to prevent it from going back.


Post time: Jul-25-2019
WhatsApp Online Chat !