News

  • Correct maintenance of hydraulic cylinders

    All equipment can only extend the life of the equipment after correct maintenance and maintenance. How should the hydraulic cylinder be maintained? Firstly,the hydraulic oil should be replaced regularly during the use of the cylinder, and the filter screen of the system should be cleaned to ensur...
    Read more
  • Storage conditions of hydraulic cylinders

    Hydraulic cylinders are recommended to be stored in a dry and moisture-proof place. There should be no corrosive substances or gases in the storage place. Proper protective oil should be added, and the oil should be used as the medium to run the hydraulic cylinder several times.When it is activat...
    Read more
  • The maintenance of hydraulic cylinders

    In the case of a large impact load, pay more attention to the lubrication of the hydraulic cylinder support. Especially after the new system is started, the function and leakage of the hydraulic cylinder should be checked repeatedly. After starting, you should also check whether the axis line is ...
    Read more
  • Installation of hydraulic cylinder

    The installation forms of hydraulic cylinders are mainly divided into two categories. One is the axis fixed type.The other is the axis swing type. It is subdivided into base type, flange type, tie rod type, shaft pin type, earring type, ball head type, intermediate ball hinge type, flange type wi...
    Read more
  • Tie Rod Hydraulic Cylinder Parts

    Hydraulic cylinders are divided into single-acting hydraulic cylinders, double-acting hydraulic cylinders, combined hydraulic cylinders, tie rod hydraulic cylinders, etc. The tie rod connection has simple structure, good manufacturability and strong versatility. However, the volume and weight of ...
    Read more
  • Metal Punching

    When designing the structural shape of sheet metal punching parts, the appearance and combination of simple and reasonable structure must be selected. With the widespread use of punching parts in life, everyone’s demand for punching parts has increased gradually, Many manufacturers hope to ...
    Read more
  • The role of the piston seal of the hydraulic cylinder

    The main parts of the hydraulic cylinder are cylinder tube, gland, cylinder rod, piston, piston seal,etc. Many people think that the purpose of installing the sealing ring on the piston is in order to prevent the piston rod from falling ,when the cylinder is placed vertically. However, it is wron...
    Read more
  • Parts Of Hydraulic Cylinder

    A hydraulic cylinder is a hydraulic actuator that converts hydraulic energy into mechanical energy and performs linear reciprocating motion and swinging motion. It has simple structure and reliable work. When it is used to realize reciprocating motion, the deceleration device can be eliminated, a...
    Read more
  • Metal stamping dies

    Common defects of metal stamping dies include deformation and burrs of precision stamping parts, cracks, warpage, surface scratches and corner deformation of bent parts, flange wrinkles of deep-drawn parts, wrinkles of deep-drawn walls, damage to deep-drawn walls, cracking, flanging, uneven bulgi...
    Read more
  • Common materials for precision metal stamping dies

    Precision metal stamping parts have the characteristics of rich types, material diversity, large automated production batches,high precision, complex shapes,high technical content and high added value.The production of precision stamping parts usually requires the use of special stamping and stre...
    Read more
  • The classification of stamping dies

    The stamping die is divided into engineering die and continuous die.Engineering molds can be divided into compound molds, tensile molds, riveting molds, etc. An engineering die only can complete one stamping process in one stroke of stamping. After the project is completed, the product needs to b...
    Read more
  • Metal nozzles

    Metal nozzles mainly include fan nozzles, spiral nozzles, air atomizing nozzles, etc. Fan nozzles can be used to clean items on metal hanging chains, paper mill blankets, mesh cloth, sand and gravel on metal screens, filters, pretreatment of metal surfaces and cleaning of iron sand on conveyor be...
    Read more
WhatsApp Online Chat !