Newyddion diwydiant

  • What are the characteristics of metal stamping parts?

    What are the characteristics of metal stamping parts?

    Advantages of metal stamping parts processing: Metal stamping parts are formed by metal stamping process and die, stamping equipment and stamping materials. The metal stamping process has the advantages of high productivity, low die cost, no need for sheet cutting, and progressive die can save 30...
    Darllen mwy
  • Share the knowledge of hardware mold

    Share the knowledge of hardware mold

    Hardware mould is a kind of special tool in industrial production, which uses all kinds of presses and special tools installed on the presses to make the metal materials into the parts or products with the required shape through the pressure. This kind of special tool is called hardware mould. Al...
    Darllen mwy
  • Taflenni metel stampio

    Taflenni metel stampio

    The well-known method of stamping an arc-shaped metal plate is to first perform a stamping test, correct the mold according to the rebound amount of the metal plate measured in the first stamping test, and increase or decrease the arc radius of the mold. Correct the mold again until you can produ...
    Darllen mwy
  • What  is  Metal Stamping?

    What is Metal Stamping?

    A stamper is a person who operates stamping equipment, performs workpiece deformation, and separates and processes. His main tasks include: (1) Operate mechanical equipment such as punches, presses, folding machines, straightening machines, and cooperate with molds to perform punching, bending, s...
    Darllen mwy
  • Waterproof Junction Box

    Waterproof junction box selection 1. Material selection The waterproof junction box is mainly used in place with relatively harsh environments. The properties of the material such as insulation, non-toxicity, corrosion resistance, and flame retardancy should be considered. Because the waterproof ...
    Darllen mwy
  • Hydraulic Cylinder Part

    Hydraulic cylinder damages Hydraulic cylinders are faulty due to seal wear, internal wall scratches and corrosion during use, especially when larger hydraulic cylinders are damaged after sealing, it is difficult and costly to repair or replace parts. Hydraulic cylinder repairs The repair of the h...
    Darllen mwy
  • Wide Angle Spray Nozzle Features

    The wide angle spray nozzle is a wide-angle fan spray that produces moderate impact, with a uniform distribution of liquid and medium size. The wide-angle nozzle is suitable for jets of air and steam. The nozzle is practical and reliable, and it can accurately control the spray angle. The wide-an...
    Darllen mwy
  • Waterproof Junction Box

    The waterproof junction box is mainly divided into a special type and a general type. The housing has the function of waterproofing and dustproofing, and is mainly used for preventing objects in the box from entering water such as lines and instruments and affecting its performance. Therefore, th...
    Darllen mwy
  • Sinc Drain rhannau

    Faucet installation Both the faucet and the inlet pipe should be installed before installing the sink. When installing the faucet, be careful to install it securely, and there should be no water leakage at the joint. Subsequent operation After installing some of the functional accessories of the ...
    Darllen mwy
  • Cable Cyffordd Box

    Cable junction box purchase tips All items have certain purchase standards, so the cable junction box is the same. What factors should be referred to when selecting the cable junction box? Here are a few points to note: Product safety When purchasing the cable junction box, make sure that the hou...
    Darllen mwy
  • Mech parts Requirements

    Choosing the right material from a variety of parts and materials is not a simple task. Because the selection of mechanical parts in mechanical design is an important part, the importance of mechanical parts to the operation of the machine cannot be ignored. As technology continues to evolve, so ...
    Darllen mwy
  • Rhannau mecanyddol

    Selection of mechanical parts: Mechanical parts are mechanically inseparable components, while mechanical parts can be divided into shaft parts and gear parts by function. In the selection of mechanical parts, surface roughness is an important reference factor to reflect the surface quality of th...
    Darllen mwy
12Nesaf> >> Page 1/2
WhatsApp Sgwrs Ar-lein!