খবর

  • Waterproof Junction Box

    The waterproof junction box is mainly divided into a special type and a general type. The housing has the function of waterproofing and dustproofing, and is mainly used for preventing objects in the box from entering water such as lines and instruments and affecting its performance. Therefore, th...
    আরও পড়ুন
  • Sink Drain Parts

    Faucet installation Both the faucet and the inlet pipe should be installed before installing the sink. When installing the faucet, be careful to install it securely, and there should be no water leakage at the joint. Subsequent operation After installing some of the functional accessories of the ...
    আরও পড়ুন
  • কেবল জাংশন বক্স

    Cable junction box purchase tips All items have certain purchase standards, so the cable junction box is the same. What factors should be referred to when selecting the cable junction box? Here are a few points to note: Product safety When purchasing the cable junction box, make sure that the hou...
    আরও পড়ুন
  • Mech parts Requirements

    Choosing the right material from a variety of parts and materials is not a simple task. Because the selection of mechanical parts in mechanical design is an important part, the importance of mechanical parts to the operation of the machine cannot be ignored. As technology continues to evolve, so ...
    আরও পড়ুন
  • মেকানিক্যাল যন্ত্রাংশ

    Selection of mechanical parts: Mechanical parts are mechanically inseparable components, while mechanical parts can be divided into shaft parts and gear parts by function. In the selection of mechanical parts, surface roughness is an important reference factor to reflect the surface quality of th...
    আরও পড়ুন
  • Terminal Box

    The use of the terminal box requires: The terminal box is an electrician accessory. In the decoration, because the wire for decoration is through the wire tube, the terminal box of the wire should be used for transition, and the wire tube is connected with the terminal box to protect The role of ...
    আরও পড়ুন
  • How to choose kitchen water sink faucet parts?

    The kitchen water sink faucet parts are the parts that must be used in daily life. So how do you choose a good quality kitchen water sink faucet part? First look at the exterior of the water sink faucet parts. If the appearance is good, and the hand touches no burrs, there is no oxidized freckles...
    আরও পড়ুন
  • How does the waterproof terminal junction box achieve waterproof function?

    The upper cover of the waterproof terminal junction box is screwed. The inner pressure cover is sealed by direct pressing to prevent the sealing rubber ring from being crushed and deformed. The sealing rubber ring of the waterproof terminal junction box is made of high-quality silica gel material...
    আরও পড়ুন
  • Outdoor Metal Junction Box

    Outdoor metal junction box product introduction: The outdoor metal junction box is generally made of aluminum alloy die-casting, which has the characteristics of corrosion resistance, wide temperature range and high mechanical strength. The junction box product is beautiful in appearance and conf...
    আরও পড়ুন
  • Sheet Metal Stamping

    Sheet metal stamping into different specifications: Material metal sheets are stamped into products of different specifications. All products are produced and processed by advanced computer technology. The hole types are diverse and the arrangement is flexible. In the years of production practic...
    আরও পড়ুন
  • Water spray nozzle

    Water spray nozzle characteristics: The water spray nozzle has the characteristics of high temperature and high pressure resistance, impact resistance, long service life, large measuring range and high measuring precision. It is suitable for high temperature and high pressure steam flow in power...
    আরও পড়ুন
  • Slider mold

    Slider mold products: The slider is a mold assembly that can slide in a direction perpendicular to the opening and closing mold or at an angle to the opening and closing direction during the mold opening operation of the mold. When the product structure is such that the mold does not normally rel...
    আরও পড়ুন
12পরবর্তী> >> পৃষ্ঠা 1/2
হোয়াটসঅ্যাপ অনলাইন চ্যাট করুন!