What problems should be paid attention to in aluminum alloy processing orders?
Aluminum alloy processing orders according to the number of requirements, can be divided into batch processing and bulk processing, but no matter what kind of processing service type, some common problems should be avoided.
First, in the CNC processing link, it is very important to program and process according to the requirements of customers' drawings. Generally speaking, if the direction is wrong, the work behind is futile. Secondly, the detection link in the processing process, the number is different, the detection requirements are not the same, parts processing, usually requires that parts must be fully checked; Batch processing, the first test, mass production sampling is not omitted. But some people may think that batch processing orders, if it is completely programmed in accordance with the drawings and carried out the first test, there is no need to test the back, but, Shenzhen Novo Wisdom xiaobian tell you that this idea is very wrong.
Second, most of the aluminum processing orders are post-processing requirements, common is sandblasting and oxidation. Sandblasting, the general customer will be given sandblasting model, and then pay attention to the depth of the knife grain problem in the processing of aluminum alloy factory, because the sandblasting model is sometimes determined by the depth of the knife grain. If oxidation, special attention should be paid to the color problem, and carefully compare with the customer to the color plate and color number, there is a visible color difference, it is necessary to rework, especially on the premise of the customer has clear requirements for color.